标题: How to Format a Single Partition of a Mediatek (MTK) device using SP Flash Tool [打印本页] 作者: Itz_evuti 时间: 2018-01-10 06:20 标题: How to Format a Single Partition of a Mediatek (MTK) device using SP Flash Tool Edited by Itz_evuti at 2018-01-10 06:23
Requirements
Download SP flash tool
Download Notepad++
Scatter file for your device. You can extract this from the stock rom / firmware of your device (you may check our collection OR backup from your device using a box e.g Miracle box, CM2, etc.
Steps on How to Format a Single Partition of a Mediatek (MTK) device using SP Flash Tool
Extract the content of the SP flash tool zip file and Launch SP flash tool (, 下载次数: 0)
上传
点击文件名下载附件
下载积分: XGold -5
Select the scatter file for your device by clicking choose beside the scatter-loading file's dropdown bar (, 下载次数: 0)
上传
点击文件名下载附件
下载积分: XGold -5
In the windows that appears next, navigate to and select the scatter file (, 下载次数: 0)
上传
点击文件名下载附件
下载积分: XGold -5
You should now be taken back to SP flash tool window, Click on the Format tab (, 下载次数: 0)
上传
点击文件名下载附件
下载积分: XGold -5
Tick the checkbox beside "Manual format flash" (, 下载次数: 0)
上传
点击文件名下载附件
下载积分: XGold -5
Open windows explore and navigate to the location of the scatter file you selected earlier on then open it using Notepad++ (, 下载次数: 0)
上传
点击文件名下载附件
下载积分: XGold -5
Scroll down the contents of the scatter file till you get to the partition you wish to format [in my case, i'm trying to format FRP partition]
(, 下载次数: 0)
上传
点击文件名下载附件
下载积分: XGold -5
Input the values of Linear_start addr and partition_size into SP flash tool then Click on Start
Linear_start addr = Begin Addresspartition_size = Format Length (, 下载次数: 0)
上传
点击文件名下载附件
下载积分: XGold -5
Once successful, you should get a green tick (, 下载次数: 0)
上传
点击文件名下载附件
下载积分: XGold -5
Lastly boot up your device
Credit to hovatek.......
作者: Zeddicuz 时间: 2018-01-10 07:00
cool Ooooo.... but don't venture if u not sure ooo 作者: Itz_evuti 时间: 2018-01-10 07:00